Category Uncategorized

Anodizing Basics for Aluminum Components

Colorful anodized aluminum machined parts

Anodizing is an electrochemical surface treatment for CNC aluminum parts, building a hard, wear-resistant oxide layer. It improves corrosion resistance, enables color dyeing and surface insulation. This guide covers Type II decorative anodizing, Type III hard anodizing, tolerance impact, color options and design notes for machined aluminum prototypes.

CNC Thread Machining Design Tips

Place after “Typical Applications.” Show machined components with visible internal and external threads.

CNC thread machining creates internal and external threads on metal and plastic machined parts via tapping, thread milling or turning. Thread selection, hole size, depth, clearance and material properties directly affect strength, assembly and yield rate. This guide covers standard thread types, DFM rules and common mistakes for prototype and low-volume threaded components.

Rapid Prototyping Basics for New Product Development

Place after “Typical Applications.” Show a physical assembly incorporating precision-machined components.

Rapid prototyping turns CAD designs into physical functional samples for fit check, validation and design iteration before mass production. CNC machining, 3D printing and vacuum casting are common rapid prototyping processes. This guide compares processes, lead times, material options and cost guidance for engineering prototypes.

Aluminum CNC Machining Handbook

Show finished milled and turned components with clean edges and precision-machined features.

Aluminum is the most widely used material for CNC machining prototypes and low-volume parts due to high strength-to-weight ratio, easy cutting and good surface finishing. This handbook covers common aluminum grades, machinability, tolerance, anodizing options, minimum feature rules and DFM guidance for custom aluminum CNC components.

PEEK Machining Guide

Natural and carbon-filled PEEK raw stock rods and sheets for CNC machining

PEEK is a high-performance thermoplastic valued for high temperature resistance, chemical inertness and biocompatibility, widely used in medical, semiconductor and aerospace CNC components. PEEK has special machining risks including thermal buildup, melting and internal stress. This guide covers grades, tolerance rules, cooling strategy and medical compliance notes for PEEK CNC prototypes.

3D Printing for Metal Prototyping Guide

LPBF metal 3D printing process diagram for metal prototype manufacturing

Metal 3D printing (SLM / DMLS) builds metal parts layer by layer for complex geometries impossible with CNC machining, such as internal lattices, conformal cooling channels and lightweight topology optimized structures. This guide compares metal 3D printing vs CNC, material choices, surface quality, cost and design rules for functional metal prototypes.

Leave a message
Email [email protected]
Phone +8613538088866
WhatsApp +8613538088866
Back to top

Contact Us

Leave a message